Whirlpool ACM 933/1 IX Instruções de Utilização descarregar pdf (Página 3)

This appliance is in Class 1.

The appliance must be used with the gas specified on the appliance data plate located on the

back cover (see details given on the product).

Installation and maintenance of the appliance must be carried out by a qualified technician in

compliance with the conditions established in the applicable regulation documents and the

ethical codes.

Gas connection

The gas supply system must comply with current local

regulations.

Important: the rubber hose must be installed in such a way

as not to be in contact with hot parts of the rear of the

appliance or kitchen. It must pass through an area free of

any hindrances and in a place where it can be inspected

along its entire length (Fig. 2).

When the appliance is connected to the gas supply, use

soapy water to check for gas leaks.

The rubber hose must be connected as shown in Fig. 3 and

4, in compliance with local applicable regulations

Fig. 2

Natural gas

Use outlet connector GN for natural gas or a propane-air

mixture.

The rubber hose must be connected to the outlet connector and

secured using hose clamp A (Fig. 3).

Butane/Propane gas

Use outlet connector B/P for Butane/Propane gas.

The rubber hose must be connected to the outlet connector and

secured using hose clamp A (Fig. 4).

The maximum length of the rubber hose is 2 m. It must be a

standard hose and must be replaced within the date printed on it.

Important: Close the gas supply tap before carrying out any

maintenance operation.

Connection details: see the specific regulations for your country.

Fig. 4

Fig. 3

1 2 3 4 5 6 7 8 ... 16 17

Sem comentários

Whirlpool ACM 933/1 IX Instruções de Utilização Página 3