Whirlpool ACM 933/1 IX Instruções de Utilização descarregar pdf (Página 10)

USING ELECTRIC HOTPLATES

(depending on the models)

When using an electric hotplate for the first time or after a long

period of disuse, turn the knob to 1 and let it heat for about 20

minutes to eliminate any possible moisture absorbed by the

internal insulating material.

- Dry the bottom of the pan before placing it on the hotplate.

- Turn the hotplate on only after placing the pan on it.

The hotplate is controlled by a commutator. Turn the knob to

position 1 in order to turn the hotplate on (Fig. 1). A warning light

on the control panel will inform you if the plate is on or off.

MANUAL IGNITION OF OVEN BURNER

(depending on the models)

To ignite the oven burner, simply insert a match through the

opening (Fig. 5) and then turn the tap to the maximum setting as

shown in figure 2.

After making sure that the burner has lit properly, gently close the

oven door. To obtain the temperature required, simply turn the

pointer of the knob to the chosen number or degrees (Tab. B)

WARNING: Do not operate the ignition for more than 15

seconds. If the burner fails to ignite, leave the oven door

open for at least 1 minute before pressing the knob again.

Fig. 1

Fig. 5

Fig. 2

= CLOSED

Pos.1 : 140°C = MINIMUM

Pos.8 : 250°C = MAXIMUM

= GRILL

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16 17

Sem comentários

Whirlpool ACM 933/1 IX Instruções de Utilização Página 10