Whirlpool CH10450GF S Instruções de Utilização descarregar pdf (Página 9)

PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24

At the end of the Minute Minder Period, the timer will emit an audible tone

and the ‘bell’ symbol will disappear.

000

The ‘cookpot’ symbol will light up either:-

- When the timer is in manual mode, or

- During the actual Cook Period.

000

‘AUTO’ will light up:-

- When the timer is rst turned on it will ash.

It will go out when a time of day is set or when

the timer is set to manual.

The ‘AUTO’ symbol will ash at the end of an Auto Cooking programme to

indicate that the programme has nished.

(When the ‘AUTO’ symbol is ashing, to return the oven to Manual

operation, turn the oven controls off, ensure that the correct time of day

is set, and press the “Manual” button - The ‘AUTO’ symbol will go out).

Timer function buttons

Minute Minder Button

Here you can set a time period of up to 23 hours 59 minutes, that will count down.

When it reaches zero, the timer will emit an audible tone.

For Example: If you set 20 minutes, the audible tone will occur 20 minutes

later.

Auto cooking programme

Cook Period Button

Cook Period is the actual length of time for which, the timer will switch the

oven(s) on as part of an “Auto Cooking” programme. (e.g. If you set 2 hours,

the food will be cooked for 2 hours).

End Time Button

The time of day at which you want an “Auto Cooking” programme to end.

For Example: If you set a “Cook Period” for 2 hours, and “End Time” of 11:00.

The timer will switch the oven(s) on at 9:00 and turn the oven(s) off at 11:00. You

will hear a audible tone at 11:00, to indicate that the Auto Cooking Programme

has nished.

Notes:

- When setting an Auto Cooking programme you will need to set the oven

control(s) to the required temperature(s) when you set the timer.

- If an Auto Cooking programme has been set the oven(s) will only operate

during the pre-programmed time.

Manual Button

Needs to be pressed to cancel an Auto Cooking programme and return the

oven(s) to Manual operation.

“+” and “-” Buttons

Used to adjust the various timer function settings.

Setting the time of day

000

Step 1 Make sure all oven controls are turned

Off.

Step 2 Check the electricity supply to the

cooker is turned on.

Step 3 When switched on the display will

show 0.00 and the Auto symbol, ashing

intermittently.

000

Step 4 Press & hold in both the Cook Period &

End Time buttons together.

Step 5 With the Cook Period & End Time

buttons still held in, press either the “+” or “-”

buttons to set the correct time of day.

Step 6 Release all the buttons simultaneously.

THE TIME OF DAY IS NOW SET.

To change the time of day repeat Steps 4, 5 & 6 above.

Note: You cannot adjust the time of day if the timer has been set for

an Auto Cooking Programme.

Setting the minute minder

Step 1 Ensure the time of day is set correctly.

000

Step 2 Press and hold the Minute Minder button.

Step 3 With the Minute Minder button held in,

set the required Minute Minder period using the

“+” and “-” buttons. A ‘bell’ symbol will light up.

Release all buttons and the timer display will

revert back to the time of day. The ‘bell’ symbol

will remain lit to signify that a Minute Minder period has been set.

At the end of the set time an audible tone will be heard, and the ‘bell’ symbol

will disappear.

000

Step 4 To cancel the audible tone press the

Minute Minder button.

Note 1: When the Minute Minder has been set, the time remaining can

be checked at any time by simply pressing the Minute Minder button.

Note 2: If necessary the Minute Minder can be cancelled before the

tone sounds by pressing and holding the Minute Minder button and

then at the same time pressing the “-” button until 0.00 appears in the

display window.

Auto cooking programmes

There are two Auto Cooking programmes that can be selected using your

timer:-

(a) To set the timer to switch the oven(s) On and Off Automatically

(b) To set timer to switch on immediately and OFF automatically after

a set cook period.

a) To set the timer to switch the oven(s) on and off

automatically

This allows you to cook at a specied time for a chosen period before

the oven switches off Automatically.

Step 1 Check that the correct time of day is set, if not follow instructions for

setting the time of day.

Step 2 Place food onto the correct shelf position in the oven and close the

oven door(s).

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 19 20

Comentários a estes Manuais

Sem comentários

Whirlpool CH10450GF S Instruções de Utilização Página 9

Comentários a estes Manuais

Manuais e produtos relacionados com Fogões Whirlpool CH10450GF S