Whirlpool HB I04 Instruções de Utilização descarregar pdf (Página 12)

ENGLISH 12

Electrical connection

WARNING. Disconnect the appliance

from the power supply.

- Installation must be carried out by

qualied personnel who know the current

safety and installation regulations.

- The manufacturer declines all liability

for injury to persons or animals and for

damage to property resulting from failure

to observe the regulations provided in this

chapter.

- The power cable must be long enough

to allow the hob to be removed from the

worktop.

- Make sure the voltage specied on the

dataplate located on the bottom of the

appliance is the same as that of the home.

}

}

}

}

}

}

}

}

1. Remove the terminal cover (A) by

unscrewing the screw and insert the cover

into the hinge (B) of the terminal.

2. Plug the power cord into the clamp and

connect the wires to the terminal block as

shown in the wiring diagram located near

the terminal.

3. Secure the power cable with the cable

clamp.

4. Close the cover (C) and screw on the

terminal with the screw removed.

For each connection to the network, the hob

automatically checks for a few seconds.

}

}

}

}

}

}

}

}

}

}

}

}

}

}

}

}

Connection to

main power

blue/grey

black/brown

yellow/green

black

brown

blue

blue (grey)

yellow/green

black

brown

yellow/green

blue

blue (grey)

AU

and UK

black

brown

blue

blue (grey)

yellow/green

black

brown

yellow/green

blue

blue (grey)

230V 2 phase 2N

ONLY FOR NL

ONLY FOR BELGIUM

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 71 72

Comentários a estes Manuais

Sem comentários