Whirlpool OSD89EDE Instruções de Utilização descarregar pdf (Página 17)

PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24

To cancel a programme press the icon .

Once the automatic cleaning cycle is over

Wait for the oven to cool down and remove any water residues using a

non-abrasive sponge. Waiting more than 10 minutes before carrying out this

operation may affect the results.

To remove stubborn dirt we recommend repeating the Intensive cycle by

adding a few detergent drops to the water.

Troubleshooting

The “Clock button” and the digits on the

display flash.

Problem Possible cause Solution

The appliance has just been connected to the

electricity mains or there has been a blackout.

Set the clock.

A programmed cooking mode does not

start.

There has been a blackout.

Reprogram the cooking mode.

Only the high luminosity “Clock button”

is lit.

The appliance is in standby mode. Press any button to exit standby mode.

The temperature inside the oven is higher

than the suggested value for the selected

mode.

An automatic mode has been selected.

“Hot” appears on the display and

cooking does not start.

Wait for the oven to cool down.

Fan-assisted cooking has been

selected and the food looks burnt.

Positions 1 and 5: the direct heat could cause

temperature-sensitive foods to burn.

We recommend switching dripping pan

positions halfway through cooking.

1 2 ... 12 13 14 15 16 17 18 19 20

Sem comentários

Whirlpool OSD89EDE Instruções de Utilização Página 17