Whirlpool ESDF 6040 FS Instruções de Utilização descarregar pdf (Página 10)

To change the power level, press the - / + buttons (from 1 to a maximum of 9 or P). To deactivate the Flexi cook function, press simultaneously the 2 selecting

buttons of the zones. To switch off the zones instantly, hold one of the zone selection button for 3 seconds.

The message “no pot” will appear on the display of the zone that is not able to detect any pot (because of missing pot, or misplaced or not suitable

for induction hob). This message remains active for 60 seconds: in this time you can add or slide pots within the exicook area as you prefer.

After 60 seconds if no pan is placed on the zone, the system stops “searching” pots on that zone, the symbol remains visible on the display to remind

that the zone is disabled.

To reactivate the Flexicook function, press one of the 2 buttons

The Flexi cook function is also able to detect when a pot is moved from one zone to the other one within the exi cook area keeping the same power level of

the zone where the pan originally was placed (see the example in the gure below: if the pot is moved from the front heater to the rear heater, the power level

will be shown on the display corresponding to the zone where the pot is placed).

It is also possible to operate the Flexi cook area as two independent cooking zones, using the corresponding button of the single zone. Place the pot in the

center of the single zone and adjust the power level with the slide touchscreen.

Important: make sure to place the pans centered on the cooking zone in the way to cover the center of the single cooking zone.

In case of big pot, oval, rectangular and elongated pans make sure to place the pans centered on the cooking zone.

Examples of good pot placement and bad pot placement:

Demo Mode

This hob is equipped with a demo mode which allows you to interact with the control panel without activating the corresponding cooking zones. The activation

and deactivation procedure must be carried out within 60 seconds of the appliance being connected to the power supply in the home. To activate the demo

mode, hold the two external cooking zone selection buttons at the same time for at least 5 seconds: “dE” appears on the central display. You can now explore

the control panel functions. The Lock and Unlock function is active also in Demo Mode. To deactivate Demo mode, repeat the procedure, remembering rst

of all to disconnect the hob from the mains and then reconnect it, carrying out the procedure within 60 seconds of connection.

5 sec.

“Power management” (Function where it is available)

Thanks to the “Power management” function, the user can set the maximum power the hob can reach, as required. This setting is possible at any time and is

maintained until the next change. By setting the required maximum power, the hob automatically adjusts distribution in the various cooking zones, ensuring

that this limit is never exceeded; with the advantage of also being able to manage all the zones simultaneously, but without overload problems. 4 maximum

power levels are available and showed on display: 2.5 – 4.0 – 6.0 – 7.2 kW (7.2 kW is considered as max power of cooktop) At the time of purchase, the hob

is set to maximum power After plugging the appliance into the electrical socket, in the rst 60 seconds it is possible to set the required power level by running

the following points: