Whirlpool ADN 103 Instruções de Utilização descarregar pdf (Página 25)

Upper bearing (depending on the model)

Materials needed:

§ Extractor

§ PHILLIPS N°2 Screwdriver

§ M8 Screws (110 mm)

§ No.12-13 monkey wrench (2)

§ No.8-9 monkey wrench

§ 4, 5 and 6 mm Allen key

§ M8 nuts (2)

1) Disassemble gearbox (see previous sections)

2) Disassemble plate/flange (see previous section)

3) Remove top seals.

4) Place and fix extracting ring.

5) Strike chisel placed over extracting ring using nylon head hammer.

Assembly:

1) Install new seals and lubricate (SHELL MULTIFAK EP2 TE code ITV420).

2) Secure bearing.

3) Mount plate.

IMPORTANT: Be careful not to damage seals. Lubricate seal lips with grease.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 31 32 33

Sem comentários

Whirlpool ADN 103 Instruções de Utilização Página 25