Whirlpool DP-009 Manual do Utilizador descarregar pdf

Delivery & Installation Pointer

September 2006

Exhaust Blower Change

New Microwave Hood Combination

(MHC)

(Whirlpool Brand)

DP-009

September 2006

8178602

The newly designed MHC is shipped with the exhaust blower in the recirculation

position. The blower can be rotated for a top discharge or rear discharge by removing

the 2 recessed screws on the rear of the MHC. The 2 visible gold colored screws

under the blower housing are being removed in error.

Procedure to reverse the blower assembly.

1. Locate the 2 screws that loosen the blower assembly. The screws are located in

the holes below the blower assembly (See Figure A.)

BACKGROUND:

ISSUE:

2. Removing the 2 screws will require either a hand screwdriver or a longer phillips

bit for your drill. These screws are recessed into the hole approximately ¾”.

3. Remove the blower assembly and rotate to the desired position. When rotating the

blower it is best to disconnect the wiring harness plug before rotating the blower

assembly. After repositioning the blower reinstall the wiring harness plug.

4. Do not to overtighten the 2 blower screws when reinstalling.

RECESSED SCREWS

DO NOT REMOVE

THESE SCREWS

FIGURE A

1 2

Resumo do Conteúdo

Página 1 - (Whirlpool Brand)

Delivery & Installation PointerSeptember 2006 Exhaust Blower Change New Microwave Hood Combination (MHC) (Whirlpool Brand)DP-009September 2006817

Página 2 - (Marca Whirlpool)

Boletín Sobre Entrega E InstalaciónDP-009Septiembre 20068178602Septiembre 2006Cambio del soplador de ventilaciónNuevas combinaciones de microondas cam

Comentários a estes Manuais

Sem comentários

Whirlpool DP-009 Manual do Utilizador

Consulte online ou descarregue Manual do Utilizador para não Whirlpool DP-009. Whirlpool DP-009 User's Manual Manual do Utilizador

Resumo do Conteúdo

Comentários a estes Manuais

Manuais e produtos relacionados com não Whirlpool DP-009