Whirlpool CAE2743BQ Manual de Instruções descarregar pdf

5. Unscrew the coinslide retaining bolt with

a 5/16” socket by turning counter clock

wise and remove the bolt.

6. Push the coinslide up, and then pull it

forward to remove from the metercase.

7. Set the coinslide and extension assembly

on a level surface and remove the return

spring(s) from the spring bracket.

8. Place coins in the coinslide of the proper

vend amount (factory preset on coin

equipped models is $1.00) and push the

slide all the way in until the coins drop

through the coinslide.

COINSLIDE PRICE VEND CHANGE INSTRUCTIONS

1. Unplug unit or disconnect power.

2. Unlock the metercase access panel or

collar control panel lock and remove the

control panel from the collar assembly.

3. On single washer and dryer models, lift

the metercase access panel up at the

back and remove.

4. On mechanical stack dryer models open

the console by lifting it up off the bottom

mounting flange. On electronic stack

dryers slide the control panel to the left,

then carefully open the control panel by

swinging the right side away from the

collar.

Electrical Shock Hazard

Disconnect power before servicing.

Replace all panels before operating.

Failure to do so can result in death or

electrical shock.

The following procedure will guide the user

through changing the coinslide vend amount

for a factory equipped or ESD vertical 8

coinslide. The procedure will be similar for

other coinslide manufacturers, consult the

manufacturers installation instructions. If the

coinslide(s) are installed, they must be

removed prior to changing the vend price. If

the coinslide(s) have not yet been installed,

skip to step 6.

1 2 3

Resumo do Conteúdo

Página 1

15. Unscrew the coinslide retaining bolt witha 5/16” socket by turning counter clockwise and remove the bolt.6. Push the coinslide up, and then pull i

Página 2

29. With the slide still all the way inserted,remove the spring bracket screw andspring bracket.10.Remove the coin inserts (2 blanks,2 functional) fro

Página 3

3Fig. 1Fig. 218.Insert the coinslide retaining bolt throughthe console access panel into the back ofthe coinslide and hand tighten the bolt tostart th