Whirlpool AMD 385 Instruções de Utilização descarregar pdf (Página 25)

A. Schematic diagram of installation spaces

B. Select install location of the indoor unit

1. Obstruct should put away from the intake or outlet vent of the indoor unit so that the airflow can be

blown though all the room.

2. Make sure that the installation had accord with the requirement of the schematic diagram of installation

spaces.

3. Select the place where can stand 4 times of the weight of the indoor unit and would not increase the

operating noise and oscillate.

4. The horizontally of the installation place should be guaranteed.

5. Select the place where is easy to drain out the condensate water, and connect with outdoor unit.

6. Make sure that there are enough space for care and maintenance. Make sure that the height between

the indoor unit and ground is above 2.5 m.

7. When installing the suspender bolt, check if the install place can stand the weight 4 times of the unit's. If

not, reinforce before installation. (Refer to the install cardboard and find where should be reinforced).

Note:

There will be lots of lampblack and dust stick on the centric fan, heat exchanger and water pump in dining

room and kitchen, which would reduce the capacity of heat exchanger, lead water leakage and abnormal

operation of the water pump.

INSTALLING CASSETTE TYPE

INDOOR UNIT

1500 Min. 1500 Min.

1500 Min.1500 Min.

3000 Min.

Models H (mm)

AMD 385 248

AMD 386 298

Piping connection

Service access door

Piping connection

Service access door

Piping connection

Service access door

500 Min. 100 Min.

100 Min.

1000 Min.

500 Min.

Fig. 1

Distance from wall side

Service space

Clearance

10 to 20mm

Unit hight in false

ceiling

Unit hight

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 159 160

Comentários a estes Manuais

Sem comentários

Whirlpool AMD 385 Instruções de Utilização Página 25

Comentários a estes Manuais

Manuais e produtos relacionados com Aparelhos de ar condicionado "split system" Whirlpool AMD 385