Whirlpool ACM 227 IX Instruções de Utilização descarregar pdf (Página 11)

11/EN

The appliance must be secured

against overbalancing by using the

supplied two safety chains on your

oven. Fasten hook (1) to the

kitchen wall (5) and connect safety

chain (2) to the hook.

1 Hook (is not supplied)

2 Safety chain (supplied and mounted

to oven)

3 Rear of cooker

4 Firmly fix chain to cooker rear

5 Kitchen wall

Installation and connection

Product can only be installed and

connected in accordance with the

statutory installation rules.

Do not install the product next to

refrigerators or freezers. The heat

emitted by the product will increase

the energy consumption of cooling

appliances.

• Carry the product with at least two

persons.

• Product must be placed directly on

the floor. It must not be placed onto

a base or a pedestal.

Do not use the door and/or handle

to carry or move the product. The

door, handle or hinges get

damaged.

Electrical connection

Connect the product to a grounded

outlet/line protected by a fuse of suitable

capacity as stated in the "Technical

specifications" table. Have the

grounding installation made by a

qualified electrician while using the

product with or without a transformer.

Our company shall not be liable for any

damages that will arise due to using the

product without a grounding installation

in accordance with the local regulations.

DANGER

The product must be connected

to the mains supply only by an

authorised and qualified person.

The product's warranty period

starts only after correct

installation.

Manufacturer shall not be held

responsible for damages arising

from procedures carried out by

unauthorised persons.

DANGER

The power cable must not be

clamped, bent or trapped or

come into contact with hot parts

of the product.

A

damaged power cable must be

replaced by a qualified electrician.

Otherwise, there is risk of electric

shock, short circuit or fire!

The mains supply data must correspond

to the data specified on the type label of

the product. The rating plate is either

seen when the door or the lower cover is

opened or it is located at the rear wall of

the unit depending on the unit type.

Power cable of your product must

comply with the values in "Technical

specifications" table.

DANGER

Before starting any work on the

electrical installation,

disconnect the product from the

mains supply.

There is the risk of electric shock!

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 174 175

Comentários a estes Manuais

Sem comentários