Whirlpool PCCF 50201260 W Instruções de Utilização descarregar pdf (Página 40)

315222

Leveling the cooker and additional support

The height of the cooker, including the support, is 90 cm; without

the support, it is 85 cm. The support features two casters at the

left and right side at the back; these facilitate moving the cooker.

At the front, left and right, the support is ﬁ tted with adjustment

screws that can be used to level the cooker horizontally and to

level its upper edge ﬂ ush with the furniture element standing next

to it (if any).

The adjustable feet are accessible, when the cooker drawer

is removed; if required, they may be turned to increase or

decrease the height, until the appliance is not in a completely

horizontal position. The adjustment screws can easily be turned

if the cooker is tilted slightly to redistribute the load. Additional

support may also be removed by undoing the four screws from

the lower side; these screws attach the support to the cooker

side walls. In this case, remove the adjustment screws from the

support and insert them left and right into the lower front cooker

support panel. Level the cooker horizontally as described above.

Some cookers are ﬁ tted with four adjustment screws at the lower

part (two at the front and two at the back); these are intended

for leveling uneven ﬂ oor or for adjusting the cooker height to

the level of the kitchen furniture elements installed next to the

cooker.

• The appliance may only be connected by a qualiﬁ ed expert.

• The appliance should be ﬁ tted with a device that disconnects it from all poles of the home

network (an omnipolar switch), with at least 3 mm of distance between the contacts in open

position. LS-switches or fuses are appropriate.

• To connect the appliance, use the rubber mains cords (type HO5RR-F with the green/yellow

earth wire), PVC insulated (type HO5VV-F with the green/yellow earth wire), or other equivalent

or superior cables.

• The distance between the cooking hob and the kitchen hood should be no less than indicated in

the instructions for kitchen hood installation.

• Veneer, glue, or plastic ﬁ nish of the furniture next to which the cooker is installed, should be

treated heat resistant (>75°C). If the veneers are not high temperature resistant, they may be

deformed.

• The mains cord behind the freestanding cooker should be placed in such way that it is not in

contact with the cooker back wall. During operation, the back wall heats up strongly.

• Packaging (plastic foil, polystyrene, etc.) must be kept out of reach of children, as it can be

a source or threat to them. Small parts can be swallowed by the children, and the foils are

hazardous because of the risk of suffocation.

Instructions for installation and connection

Important warnings

1 2 ... 35 36 37 38 39 40 41 42 43 44

Comentários a estes Manuais

Sem comentários

Whirlpool PCCF 50201260 W Instruções de Utilização Página 40

Comentários a estes Manuais

Manuais e produtos relacionados com Fogões Whirlpool PCCF 50201260 W