Whirlpool KHMD4 60510 Instruções de Utilização

Instructions for useGBLU

The electrical connections must comply with current legislation and be carried out by a qualified, competent person. • Information on the voltage an

Note: Refer to the table on page 6 to ensure the correcttype of injector is to be fitted.Traditional burners (T)1. Remove the cap (A).2. Remove the sp

Regulating the minimum flow level must be done with the tap at thelowest position (small flame) .There is no need to regulate the primary air in the b

Before any cleaning and/or maintenanceoperation, disconnect the hob from powersupply and wait until it is cold.To keep the hob in perfect condition, r

If the hob is not working properly work throughthe this guide before contacting our CustomerCare Centre.The burner does not ignite, or the flame isuns

400010852260Printed in Italy n11/15Whirlpool Europe S.r.l. Socio UnicoViale G. Borghi, 27 - 21025 Com

Product description and symbols 4Using the burners

1. Removable pan supports2. Auxiliary burner3. Semi-rapid burner4. Semi-rapid burner5. Professional wok burner6. Auxiliary burner control

Read the instructions to get the best out of yourhob.- Use pans with a similar diameter to the burner(see the table on this page)- Use flat bottomed

If a hood is to be installed above the hob, refer to the hood installation instructions to ensure the correctheight above the hobNote: If the distance

To get the most out of your hob, please readthe instructions carefully and keep them forfuture consultation.• These instructions are only valid in t

PackingThe packing material is 100% recyclable and islabelled with the recycling symbol . Pleasedispose of all packing responsibly and carefully.Prod

Technical information for the installer• This appliance can be built into a 20mm to40mm thick worktop.• If no oven is to be installed below the ho