Whirlpool KHMD4 60510 Instruções de Utilização descarregar pdf (Página 12)

Regulating the minimum flow level must be done with the tap at the

lowest position (small flame) .

There is no need to regulate the primary air in the burners.

To ensure the minimum level is properly regulated, remove the control

knob and adjust the screws found on the tap as follows:

1. tighten to reduce the height of the flame 1 (-)

2. slacken to increase the height of the flame (+);

3. With the burners on, rotate the buttons from the maximum to

the minimum position to check the stability of the flame.

Regulating the minimum flow level of the gas taps

o replace the injectors in special burner it is necessary to:

1. Remove spreader (A).

2. Unscrew the injector (B) with a box spanner 7.

3. Replace the injectors.

4. Put back the spreader.

Note: make sure that:

1. After replacement the spreader (A) is inserted correctly on the

burner.

Injectors replacement in the wok burner

1 2 ... 7 8 9 10 11 12 13 14 15 16

Sem comentários

Whirlpool KHMD4 60510 Instruções de Utilização Página 12