Whirlpool AKT 803/LX Instruções de Utilização descarregar pdf (Página 3)

INSTALLATION

Assembly

A) If the worktop is made of wood, use the appropriate

brackets, spring clips and screws provided.

• Position the 4 clips (A) around the cooktop frame, in the

slots provided, see Fig. 1

• Measure the centre of the vertical sides of the cut out a

shown in Fig. 2.

• Position the centre of the brackets (C) on the centre of the

side previously identified.

• The upper edge of the brackets must be flush with the

worktop surface.

• Secure using the 4 screws (B) provided that should screwed

into the pre-prepared holes.

• Insert the cook hob into the pre-prepared hole ensuring that

the clips (A) lodge into the bracket slots provided

(C Fig. 4 e 5).

B) If the worktop is made of marble, ceramic, stone,

plastic materials, etc., order the installation kit, code

4812 310 19277 from an authorized after-sales service.

Fig. 2

Fig. 1

Fig. 3

Fig. 4

Fig. 5

1 2 3 4 5 6 7

Sem comentários

Whirlpool AKT 803/LX Instruções de Utilização Página 3