Whirlpool AKM 460/NB/01 Instruções de Utilização descarregar pdf (Página 8)

N C

M Y

INSTALLATION

Electrical connection

x The electrical connections must comply

with local regulations.

x The data relevant to the voltage and power

absorption are indicated on the rating plate.

x The earthing of this appliance is

compulsory by law.

The manufacturer cannot be held

responsible for injury to persons or

animals or damage to property arising

from failure to comply with these

requirements.

x When the cooking hob is installed,

provide a single-pole circuit breaker

with a contact breaking distance of at

least 3 mm.

x If necessary, the electrical power cable

must be replaced exclusively with a

power cable having identical

characteristics to the original supplied

by the manufacturer. This operation

must be performed by Customer Service

or a qualified electrician.

Connection to gas supply

The gas supply system must comply with

local regulations.

The connection of the cooking hob to the gas

pipe network or gas cylinder must be made by

means of a rigid copper or steel pipe with

fittings complying with local regulations, or b y

means of a continuous-surface stainless steel

hose complying with local regulations. Interpose

gasket

in the elbow connection.

Themaximumlengthofthehoseis2m.

Important: if a stainless steel hose is used,

it must be installed so as not to touch any

movable part of the furniture. It must pass

through an area where there are no

obstructions and where it is possible to

inspect it on all its length.

8

8

1 2 3 4 5 6 7 8 9 10

Comentários a estes Manuais

Sem comentários