Whirlpool ACM 918/BA Instruções de Utilização Página 13

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 16
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 12
EN13
If your glass has the iXelium
TM
logo, your hob is equipped with iXelium
TM
treatment. iXelium
TM
is the exclusive Whirlpool finishing that guarantees a perfect clean and
a long-lasting brilliance. Therefore, if you have a IXELIUM hob, we strongly suggest to observe the following cleaning recommendations:
Use a soft cloth (microfibre is best) dampened with water or with everyday glass cleaning detergent.
If you want to enhance furtherly cleaning results, just let the glass in contact with a wet cloth for couple of minutes.
IMPORTANT: Do not use abrasive sponges or scouring pads. Their use could eventually ruin the glass.
After each use, clean the hob (when it is cool) to remove any deposits and stains due to food residuals.
Sugar or foods with a high sugar content damage the hob and must be immediately removed.
Salt, sugar and sand could scratch the glass surface.
Use a soft cloth, absorbent kitchen paper or a specific hob cleaner (follow the Manufacturers instructions).
Liquid splillages on the cooking zones may make pan vibrate or move
Dry the hob thoroughly after cleaning it.
Read and follow the instructions given in the section “Instructions for use”.
Check that the electricity supply has not been shut off.
Dry the hob thoroughly after cleaning it.
If, when the hob is switched on, alphanumeric codes appear on the display, consult the following table for instructions.
If the hob cannot be switched off after using it, disconnect it from the power supply.
Induction hobs can make whistling or crackling sounds during normal operation, these actually come from the pots and pans as a result of the characteristics of the
bottoms (for example, bottoms made of several layers of material, or uneven bottoms). These noises vary depending on the pots and pans used and the amount of food
they contain, and are not indicative of a defect of any kind.
In addition, the induction hob is equipped with an internal cooling system to control the temperature of electronic parts; as a result, during operation and for several minutes
after the hob has been switched off, the noise of the cooling fan will be audible. This is perfectly normal and indeed essential for proper functioning of the appliance.
Before contacting the After-sales Service:
1. See if you can solve the problem yourself with the help of the “Troubleshooting guide”.
2. Switch the appliance off and then on again it to see if the problem has been eliminated.
If the problem persists after the above checks, contact the nearest After-Sales Service.
Always specify:
a brief description of the fault;
the product type and exact model;
the Service number (the number after the word Service on the rating plate), located under the appliance (on the metal plate).
your full address;
your telephone number.
If any repairs are required, contact an
authorised After-Sales Service Centre
(to ensure the use of original spare parts and correct repairs). Spare parts are available for 10 years.
CLEANING
WARNING
- Do not use steam cleaners.
- Before cleaning, make sure the cooking zones are switched off and that the residual heat indicator (“H”)
is not displayed.
TROUBLESHOOTING GUIDE
ERROR CODE DESCRIPTION POSSIBLE CAUSES ERROR ELIMINATION
C81, C82
The control panel switches off because
of excessively high temperatures
The internal temperature of electronic
parts is too high
Wait for the hob to cool down
before using it again.
F42 or F43 The connection voltage is wrong
The sensor detects a discrepancy
between the appliance voltage and
that of the mains supply
Disconnect the hob from the
mains and check the electrical
connection
F12, F21, F25, F36, F37, F40, F47,
F56, F58, F60
Call the After-Sales Service and specify the error code
NOISES MADE BY THE HOB
AFTER-SALES SERVICE
Vista de página 12
1 2 ... 8 9 10 11 12 13 14 15 16

Comentários a estes Manuais

Sem comentários

Fujitsu S26361-K1201-V202 manuales

Manuales del propietario y guías del usuario para Pantallas Led Fujitsu S26361-K1201-V202.
Ofrecemos 1 manuales en pdf Fujitsu S26361-K1201-V202 para descargar gratis por tipos de documentos: Ficha de datos


Fujitsu S26361-K1201-V202 Ficha de datos (2 paginas)


Marca: Fujitsu | Categoria: LED displays | Tamaño: 0.05 MB |

 

Tabla de contenidos





Más productos y manuales para Pantallas Led Fujitsu

Modelos Tipo de documento
S26361-K1178-V150 Ficha de datos   Fujitsu SCENICVIEW Series 22" LCD TFT Monitor, 2 paginas
S26361-K1248-V170 Ficha de datos   Fujitsu SCALEOVIEW Series L19W-10, 2 paginas
S26361-K959-V150 Ficha de datos   Fujitsu SCENIC SCENICVIEW B19-1, 2 paginas
S26361-K1016-V150 Ficha de datos   Fujitsu SCENICVIEW Series A15-1 15" TFT TCO03 analog, 2 paginas
VFY:D1ED74E22W01SD Ficha de datos   Fujitsu SCENICVIEW Series E22W-1, 2 paginas
S26361-K977-V152 Ficha de datos   Fujitsu SCENICVIEW Series B17-2 CI, 2 paginas
S26361-K1254-V140 Ficha de datos   Fujitsu P Line P24W-5 ECO IPS, 4 paginas
S26361-K973-V710 Ficha de datos   Fujitsu SCALEOVIEW FSC T15-1, 2 paginas
S26361-K956-V150 Ficha de datos   Fujitsu SCENICVIEW P19-1S, 2 paginas
S26361-K1310-V181 Ficha de datos   Fujitsu Displays SL 3230T, 3 paginas
S26361-K1138-V170 Ficha de datos   Fujitsu SCALEOVIEW Series L19-2W, 2 paginas
S26361-K1188-V202 Ficha de datos   Fujitsu SCALEOVIEW Series L22W-7SD 22" Display, 1 paginas
S26361-K1285-V181 Ficha de datos   Fujitsu AMILO Display SL 3260W, 2 paginas
S26361-K1062-V150 Ficha de datos   Fujitsu SCENICVIEW Series A17-2 17" TFT TCO03, 2 paginas
S26361-K1200-V381 Ficha de datos   Fujitsu SCENICVIEW Series E22W-1, 2 paginas
S26361-K1175-V150 Ficha de datos   Fujitsu SCENICVIEW Series P22W-3, 2 paginas
S26361-K1229-V181 Ficha de datos   Fujitsu AMILO Display L 3190S, 2 paginas
S26361-K1153-V173 Ficha de datos   Fujitsu SCALEOVIEW Series L19-2W, 2 paginas
S26361-K1118-V170 Ficha de datos   Fujitsu SCALEOVIEW Series H22-1W, 2 paginas
S26361-K1149-V150 Ficha de datos   Fujitsu SCENICVIEW Series A17-3A, 2 paginas