Whirlpool ACM 435/IX/F/G Instruções de Utilização descarregar pdf (Página 2)

DESCRIPTION OF PRODUCT AND SYMBOLS

BURNER OPERATION

1. Turn the corresponding knob anticlockwise to

the max. flame symbol.

2. Press the knob against the control panel to light

the burner.

3. When the burner is lit, keep the knob pressed

for about 5 seconds to allow the thermocouple

(provided for each burner) to heat up.

This safety device shuts off the gas if the flame

goes out accidentally (draughts, interruption of

gas, liquids boiling over, etc.).

The device must not be operated for more

than 15 sec. If the burner does not remain lit

after this time, wait at least one minute before

trying to light it again.

It may happen that the burner goes out when

the knob is released. This means that the

thermocouple has not heated up enough.

In this case, repeat the operations described

above.

1. Removable grids

2. Semi-rapid burner

3. 4-crown burner

4. Semi-rapid burner

5. Semi-rapid burner control knob

6. 4-crown burner control knob

7. Semi-rapid burner control knob

Symbols

● Tap closed

Max. flame

Min. flame

2 3

1 2 3 4 5 6 7 ... 12 13

Sem comentários

Whirlpool ACM 435/IX/F/G Instruções de Utilização Página 2