Whirlpool REFRIGERATOR-FREEZER Manual do Utilizador

REFRIGERATOR SAFETYTable of ContentsREFRIGERATOR SAFETY... 1INSTALLATION INSTRUCTIONS ... 3REFRIGERATOR

103. Use a quarter-turn shutoff valve or the equivalent, served by a ¹⁄₂" copper household supply line. NOTE: To allow sufficient water flow to t

11Style 41. Unplug refrigerator or disconnect power.2. Connect the supplied hose to the water valve outlet on the back of the refrigerator.Complete th

12 The preset settings should be correct for normal household usage. The controls are set correctly when milk or juice is as cold as you like and whe

13IMPORTANT: This feature only works if the ice maker is turned on. See “Ice Maker and Storage Bin.” Press FAST FREEZING to turn on the Fast Freezing

14The Ice DispenserIce dispenses from the ice maker storage bin in the freezer when the dispenser lever is pressed. To turn off the ice maker, see “Ic

15Style 2Turning the Ice Maker On/Off: To turn ON the ice maker, simply lower the wire shutoff arm. To manually turn off the ice maker, lift the wir

163. Wash stainless steel and painted metal exteriors with a clean sponge or soft cloth and a mild detergent in warm water. 4. On some models, wash gl

17The refrigerator is noisyRefrigerator noise has been reduced over the years. Due to this reduction, you may hear intermittent noises from your new r

18The ice cubes are hollow or smallThis is an indication of low water pressure.Check the following: Is the water shutoff valve fully open? Are there

19ACCESSORIESTo order accessories, contact the dealer from whom you purchased your refrigerator and ask for the appropriate part number listed below.

2Proper Disposal of Your Old RefrigeratorIMPORTANT: Child entrapment and suffocation are not problems of the past. Junked or abandoned refrigerators a

W10332634A© 2010.All rights reserved.6/10Printed in Mexico

3INSTALLATION INSTRUCTIONSUnpack the RefrigeratorRemove packaging materials. Do not use sharp instruments, rubbing alcohol, flammable fluids, or abras

4Door Removal, Leveling and AlignmentGather the required tools and parts and read all instructions before starting installation. Save these instructio

5Remove the Doors 1. Unplug refrigerator or disconnect power.2. Open both doors to 90°. Remove the base grille by removing the two screws, then pullin

6 Reinstall the wiring clip over the grommets. On dispenser models, first install the smaller grommet into the top of the clip, then install the larg

7Product DimensionsTop View Side View Height dimensions are shown with the leveling legs extended to the minimum height of ¹⁄₄" (6.35 mm) below

8Opening Dimensions Height dimensions are shown with the leveling legs extended to the minimum height of ¹⁄₄" (6.35 mm) below the refrigerator.N

9Recommended Grounding MethodA 115 Volt 60 Hz. (Plug 1), 220/240 Volt 50 Hz. (Plugs 2 or 3), or 220 Volt 60 Hz. (Plug 3) AC only 10-amp fused and grou