Whirlpool LAM 1760 Instruções de Utilização Página 10
- Página / 13
- Índice
- RESOLUÇÃO DE PROBLEMAS
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
10
Control panel warnings
Residual heat indicator.
The hob is fitted with a residual heat indicator
for each cooking zone. These indicators alert the
user when cooking zones are still hot.
If the display shows , the cooking zone is still hot. If
the residual heat indicator of a given cooking zone is
lit, that zone can be used, for example, to keep a dish
warm or to melt butter.
When the cooking zone cools down, the display goes
off.
Incorrect or missing pot indicator.
If you are using a pot that is not suitable, not
correctly positioned or not of the correct
dimensions for your induction hob, the
message “no pot” will appear in the display (see
figure at side). If no pot is detected within 60 seconds,
the hob switches off.
Special functions
Some models have special functions:
Fast boil function (Booster)
This function, only present on some cooking zones,
makes it possible to exploit the hob’s maximum
power (for example to bring water to the boil very
quickly). To activate the function, press the “+”
button until “P” appears on the display. After 10
minutes’ use of the booster function, the appliance
automatically sets the zone to level 9.
Automatic function
The function automatically sets the power level to
maintain a light boil. Activate this function after
bringing to the boil, pressing first of all the cooking
zone button followed by button .
Demo Mode
This hob is equipped with a demo mode which allows
you to interact with the control panel without activating
the corresponding cooking zones. The activation and
deactivation procedure must be carried out within 60
seconds of the appliance being connected to the power
supply in the home.
To activate the demo mode, hold the two external
cooking zone selection buttons at the same time for at
least 5 seconds: “dE” appears on the central display. You
can now explore the control panel functions. The Lock
and Unlock function is active also in Demo Mode.
To deactivate Demo mode, repeat the procedure,
remembering first of all to disconnect the hob from the
mains and then reconnect it, carrying out the procedure
within 60 seconds of connection.
Activation/deactivation of the acoustic signal
After switching the hob on, press and hold the “+” button and the outermost selector button on the right
simultaneously for at least five seconds (“control panel lock”).
5 Sec
5 Sec
- Installation & 1
- User’s Instructions 1
- Contents 2
- Safety symbols 3
- Important safety information 4
- Before use 5
- Energy saving tips 5
- Installation 6
- Assembly 7
- Undercounter hob installation 7
- Electrical connection 8
- Operating the hob 9
- Control panel warnings 10
- Care & maintenance 11
- Troubleshooting guide 11
- After-sales service 12
- Safeguarding the environment 12
- 12 months guarantee 13
Manuais e produtos relacionados com Fogões Whirlpool LAM 1760
(2 páginas)
Fogões Whirlpool AKP 541 IX Instruções de Utilização
(11 páginas)
(11 páginas)
Fogões Whirlpool ADN 636 Manual de Instalação
(12 páginas)
(12 páginas)
Fogões Whirlpool AKS 369/NE Instruções de Utilização
(134 páginas)
(134 páginas)
Fogões Whirlpool MCP 345 SL Instruções de Utilização
(20 páginas)
Fogões Whirlpool AKP 728 IX Instruções de Utilização
(11 páginas)
(11 páginas)
Fujitsu S26361-K1201-V202 manuales
Manuales del propietario y guías del usuario para Pantallas Led Fujitsu S26361-K1201-V202.
Ofrecemos 1 manuales en pdf Fujitsu S26361-K1201-V202 para descargar gratis por tipos de documentos: Ficha de datos
Comentários a estes Manuais