Whirlpool KIB 644 C E IT Instruções de Utilização descarregar pdf (Página 5)

ays „FL” error and the calibration is suspended. The

error will disappear when satisfactory ambient ligh-

ting is detected and the touch control calibration pro-

cedure will now complete satisfactorily

After connecting the hob to the electricity mains, the

touch pannel might be automatically locked. To un-

clock the pannel press and hold the Control Panel

Loock button

To switch the hob on, press and hold the button for

approximately one second.

The cooktop is switched On when a beep sound is

emmited and all the cooking zones displays show

the digit point.

When the cooktop is OFF, after 5 sec, the control As

soon as we Touch a key, the KEYLOCK LED

goes ON and we can continue to operate us normal

unlocking the keyboard switches off to reduce the power

consumption.

Switching off the cooktop is signalled by 3 beep sound

• Loud whistle: heard when two induction elements of

the same group function simultaneously at maximum

power and/or when the booster function is set on

the larger element while the other is auto-adjusted.

Noise is reduced by decreasing the power level of the

auto-adjusted induction element; pot bottom layers

made of different kinds of materials are among the

main causes of this noise.

• Fan noise: a fan is necessary to ensure the hob functions

correctly and to safeguard the electronic unit from

possible overheating. The fan functions at maximum

power when the large induction element is at maximum

power or when the booster function is on; in all other

cases, it works at average power depending on the

temperature detected. Furthermore, the fan may continue

to work even after switching the hob off, if the temperature

detected is high.

The types of noise listed above are due to induction

technology and are not necessarily operational faults.

If the (-) or (+)button is pressed for an extended period

of time, the display scrolls quickly though the power

levels and timer minutes.

Initial Light Conditions

When power is initially applied to the Cooktop, the to-

uch control conducts a calibration process for the to-

uch keys, which requires a low level of ambient light in

the area of the touch keys.

If during this calibration process excessive ambient

lighting is detected the User Interface displays „FL”

(Infrared Ambient Light Error) and the control cali-

bration process is suspended. In order to rectify the

process any lighting that could effect the calibration

process should be switched off (e.g. halogen cooker

hood lighting). The error will disappear when satisfac-

tory ambient lighting is detected and the touch control

calibration procedure will now complete satisfactorily.

-The „FL” error can only be generated within approx 3s

of initial power being applied to the cooktop.

-We recommend that the user switches off all cooker

hood lighting and lighting directed towards the cook-

top when power is initially applied to the cooktop.

-After the touch control has conducted its initial cali-

bration process, (approx 3s) any cooker hood or other

lighting can be switched on as normal and will not af-

fect the operation of the touch control.

Switching on the hob

When power is initially applied to the Cooktop, the

touch control conducts a calibration process for the

touch keys, which requires a low level of ambient

light in the area of the touch keys. If excessive am-

bient lighting is detected, the User Interface displo-

Power Management for ECO Cooktop

For ECO power cook tops, each time the user tries to

increase the power, the total power level of the Cooktop

is calculated. If this total power level is greater than the

Cooktop power limit, the power increase is not allowed.

An error beep sounds and the heater display shows an

‘r’ for 3 seconds .

Switching on the cooking zones

Each cooking zone is controlled using a selector button

and a power adjustment device consisting of a

double(-) and (+) button.

• To begin operating a cooking zone, press the

corresponding control button and set the desired

power level (between 0 and 9) using the buttons (-)

or (+)

Press and hold the (-) button to set the power level

immediately at “9”

Press and hold (+) and (-) buttons simultaneously to

return to power level “0”

If the power level is “0” press and hold the (+) button

to increase the power level quickly

The choice of a cooking zone is signalled by a beep

sound, and then the power level is shown on the

display

If the selection of a heater is not done in 10 seconds,

the cooktop will be turned off automatically.

1 2 3 4 5 6 7 8 9 10 ... 19 20

Comentários a estes Manuais

Sem comentários

Whirlpool KIB 644 C E IT Instruções de Utilização Página 5

Comentários a estes Manuais

Manuais e produtos relacionados com Fogões Whirlpool KIB 644 C E IT