Whirlpool HJA1733 Instruções de Utilização descarregar pdf (Página 7)

Assembly

1. Position the clips (A) in the spaces provided on

the hob trim (fig. 3) if not already positioned.

2. Measure the centre point of the vertical sides of

the cut-out (fig. 1)

3. Fit the brackets (C) in the centre of the vertical

sides, aligning the upper edge of the brackets so

that they are flush with the worktop surface

(fig. 2).

4. Fix the brackets with the 4 screws supplied (B)

using the holes provided.

5. Insert the hob in the cutout, making sure the clips

(A) are secured in the spaces provided (fig. 4).

Undercounter hob installation

• If an oven (which must be of our manufacture) is

to be installed under the hob, ensure it is

equipped with a cooling system and observe the

distances given in the figure below.

• There must be nothing between the cooktop and

the hob (cross rails, panels, brackets, etc.).

5mm

fig. 2

fig. 1

fig. 4

fig. 3

1 2 3 4 5 6 7 8 9 10 11 12 13

Sem comentários

Whirlpool HJA1733 Instruções de Utilização Página 7