27
Fig. 3
Lighting the burners WITH ELECTRIC
IGNITION
FGZ 3400 IN/01 - model with ignition
incorporated in the burner knobs
These models can be identified by the ★
symbol near the flame position symbol
(Fig. 3). To light one of the burners,
press and turn the corresponding knob
to the maximum flow position (large
flame) and keep the knob pressed down
until the gas is lit.
Turn the gas tap to the position required.
Whenever special conditions of the gas
supplied locally make it difficult to light
the burner with the knob in the maxi-
mum flow position, repeat the operation
with the knob in the minimum flow posi-
tion.
PAN DIAMETER
BURNER MINIMUM MAX.
Auxiliary 6 cm 14 cm
Medium-speed 16 cm 20 cm
Rapid 20 cm 24 cm
do not use pans with concave or convex bases
Fig. 4
CHOICE OF BURNER
The symbols printed on the panel by the
side of the knob indicate the correspon-
dence between knob and burner.
Choose the suitable burner depending
on the cookware diameter and capacity.
The pan diameter should be suitable for
the burner power to make the most of
the burner's high efficiency and not
waste fuel.
A small pan does not boil more quickly
on the large burner.
Attention: During use the hob
becomes very hot under the
cooking zones.
Keep children away.
Comentários a estes Manuais