Whirlpool CLHB 20 NE Instruções de Utilização descarregar pdf (Página 9)

GB7

Before using the glass ceramic hob

To make the most of your new appliance, please read the user instructions carefully and keep them handy for future consultation.

First use

Upon first installation, the control panel performs a functional test for about 1 second, after which it automatically switches

to the Key lock function.

To deactivate the function, press and hold button D ; an acoustic signal will sound and the corresponding led will

turn off.

N.B.: if a reset occurs, repeat the procedure described above.

Operating the hob

To switch the hob on, keep button A pressed for approx. 2 seconds. The 4 cooking zone displays show 0.

If within 20 seconds none of the cooking zones is activated, the hob switches off automatically as a safety precaution.

Press one of the buttons B corresponding to the cooking zone you intend to use.

Select the heat setting required with buttons E or C. The other selectable cooking settings go from 1 to 9.

Press buttons +/- at the same time to cancel all settings.

Pressing button + when level 9 is reached, the Booster function is activated and the letter A appears on the display.

Important: the control is deactivated 10 seconds after the heat setting has been selected. To change the heat setting, first

press the selection button B again, then proceed to change the setting, using buttons E or C.

Timer

To set the Timer function, select the required cooking zone and heat setting, and again press the button for the cooking

zone. The indication 00 blinks on the 2 displays.

Press buttons C or E to set the time from 1 to 99.

Key lock

The Key lock function is switched on by holding down button D until a dot lights up above the function button. The

Key lock function locks all the hob’s other functions, with the exception of the On/Off button A .

The function remains on even after the hob is switched off and on again and can be deactivated by pressing button D

again until the dot above the function button goes off.

Residual heat indicator

When the cooking zone is switched off, the residual heat indicator H remains on or flashes alternating with 0 until the

temperature of the hob returns within safety levels.

Important: the hob’s safety features include an automatic switching off function. Prolonged use of the same heat

setting triggers automatic switch-off of the cooking zone (for example, after around 1 hour at maximum heat setting, the

cooking zone switches off).

CONTROL PANEL

A. On/Off

B. Cooking zone and timer selection

C. Heat setting increase

D. Key lock

E. Heat setting decrease

INSTRUCTIONS FOR USE

1 2 3 4 5 6 7 8 9 10 11 12

Sem comentários

Whirlpool CLHB 20 NE Instruções de Utilização Página 9