
28
CARE AND MAINTENANCE
Before any cleaning and/or maintenance
operation, disconnect the hob from power
supply and wait until it is cold.
Important: Never use steam cleaners.
To keep the hob in perfect condition, remove any
food residuals and clean it after every use.
Hob cleaning:
•
The stainless steel surface may become stained in
case of prolonged contact with very hard water
or aggressive detergents. It is advisable to
immediately wipe any spills (water, sauce, coffee,
etc.).
Clean with lukewarm water and neutral
detergent, rinse and dry thoroughly with a soft
cloth or shammy leather or specific cloth for
cleaning stainless steel surfaces. Remove
baked-on dirt with specific cleaners for stainless
steel surfaces.
•
Do not use abrasive or corrosive products,
chlorine-based products or scouring pads.
•
Do not use steam cleaners.
•
Do not use flammable products.
•
Do not leave acid or alkaline substances, such as
vinegar, mustard, salt, sugar or lemon juice on
the hob.
Note: Continuous use of the hob could cause
the original colour to change at the burners,
due to the high temperature of the flame. This
does not affect hob operation or its
performance.
CARE AND CLEANING OF HOB
COMPONENTS
Grids, burner caps and burners can be
removed to be cleaned.
1.
Wash them by hand with hot water and neutral
detergent, making sure to remove any
encrustations and checking that the burner
openings are not clogged.
2.
Rinse out and dry carefully.
3.
Refit burners and burner caps correctly in the
respective housings.
4.
When refitting the grids, make sure the potstand
zone is aligned with the burner.
Note:
For models equipped with electric igniters
and safety thermocouples, the end part requires
thorough cleaning in order to ensure correct
operation. Check frequently and, if necessary, clean
them with a damp cloth. Any baked-on food should
be removed with a toothpick or needle.
To avoid damaging the electric ignition, do not
use it when the burners are not fitted.
Comentários a estes Manuais