Whirlpool AKL 702 IX Instruções de Utilização descarregar pdf (Página 8)

8

Electrical connection

Electrical connections

• The electrical connections must comply with

local regulations.

• The data relevant to the voltage and power

absorption are indicated on the rating plate.

• The earthing of this appliance is compulsory

by law.

The manufacturer cannot be held responsible

for injury to persons or animals or damage to

property arising from failure to comply with

these requirements.

• When the appliance is installed, provide a

multi-pole circuit breaker with a contact

separation (at least 3 mm) in all poles that

provide full disconnection under overvoltage

category III and must be incorporated in the

fixed wiring in accordance with the national

wiring rules.

• After installation, the electric parts must not

be accessible.

• For electrical connection, use an H05RR-F

cable

(see table in product description sheet).

• The power cable must be long enough for

connecting the appliance, once fitted in its

housing, to the power supply.

• The electrical components must not be

accessible to the user after installation.

ELECTRICAL COOKING HOBS

WITH SIDE CONTROLS

Connection to terminal board

1. Open the cover of the terminal board and loosen

screw by means of a tool, as shown in the

figure.

2. Unsheathe the cable for about 70 mm.

3. Peel off the internal cables for about 10 mm

loosen cable clamp screw , and insert the cable

in the cable clamp.

• The terminal board has 4 terminals:

1-2 interconnected (line)

3 (neutral)

4 (earth): marked with symbol .

4. Connect the cable to the terminal board,

following the indications of the connection

diagram punched on the bottom of the cooking

hob. Fasten the cable clamp and close the cover.

1 2 3 4 5 6 7 8 9 10 11 12

Comentários a estes Manuais

Sem comentários