Whirlpool ACM 754/BA Instruções de Utilização descarregar pdf (Página 10)

EN18

Simmering

After bringing to the boil, press the key and the hob will automatically set the correct power level to keep the pot simmering. “A” appears on the display: the indicator light

lights up. To deactivate the function, simply press OFF on the slide touchscreen.

Melting

This function maintains a permanently low temperature in the cooking zone. After positioning the pot/accessory on the chosen cooking zone, switch on the hob and select the

cooking zone. Press the key: “A” appears on the display and the indicator light turns on. To deactivate the function, simply press OFF on the slide touchscreen.

IMPORTANT: do not use abrasive sponges or pan scourers. as they could ruin the glass surface.

• Clean the hob, when it is cool, after each use in order to remove any food residues.

• Sugar and foods with a high sugar content damage the glass ceramic surface and must be immediately removed.

• Salt, sugar and sand can scratch the glass surface.

• Use a soft cloth, absorbent kitchen wipes or a specific hob cleaner (follow the Manufacturer’s instructions).

• Read and follow the instructions given in the section “Instructions for use”.

• Check that the electricity supply has not been shut off.

• Clean the hob and dry it thoroughly.

• If, when the hob is switched on, alphanumeric codes appear on the display, consult the following table for instructions.

• If you are unable to turn the hob off after using it, disconnect it from the power supply.

CLEANING

WARNING

- Never use steam cleaners.

- Before cleaning, make sure the cooking zones are switched off and that the residual heat indicator (“H”)

is not displayed.

TROUBLESHOOTING GUIDE

ERROR CODE DESCRIPTION POSSIBLE CAUSES REMEDY

The hob switches off and after 10 seconds

emits an acoustic signal every 30 seconds.

Continuous pressure on control panel

area.

Water or utensils on control panel. Clean the control panel.

C81, C82, C83

The control panel switches off because of

excessively high temperatures.

The internal temperature of electronic

parts is too high.

Wait for the hob to cool down before

using it again.

F42 or F43

The connection voltage is wrong. The sensor detects a discrepancy between

the appliance voltage and that of the

mains supply.

Disconnect the hob from the mains

and check the electrical connection.

F12, F21, F25, F36, F37, F40, F47, F56, F58,

F60, F61, F62, F63, F64

Call the After-sales Service and specify the error code.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16 17

Comentários a estes Manuais

Sem comentários

Whirlpool ACM 754/BA Instruções de Utilização Página 10

Comentários a estes Manuais

Manuais e produtos relacionados com Fogões Whirlpool ACM 754/BA