Whirlpool PCTOC140060NE Instruções de Utilização descarregar pdf (Página 4)

ELECTRICAL CONNECTION

Electrical connection must be made before connecting the appliance to the electricity supply.

Installation must be carried out by qualied personnel who know the current safety and installation regulations.

Specically, installation must be carried out in compliance with the regulations of the local electricity supply

company. Regulations require that the appliance be earthed. Connection to the mains must be carried out by a

qualied technician in accordance with the manufacturer's instructions and in compliance with local regulations.

The installer is responsible for connecting appliances correctly to the mains and for observing the safety

regulations. After the oven has been installed, the electrical components must be inaccessible. Important: do

not connect the oven to the power supply before you have nished connecting the oven and cooktop. Before

connecting the oven (or box) to the power supply, make sure that the hob is among the ones listed in the hob/

oven pairing product sheet provided.

CONNECTION TO THE TERMINAL BLOCK

Make sure that the voltage indicated on the rating plate is the same as the mains voltage. Technical data

is given on the rating plate on the edge of the hob and also below:

POWER SUPPLY

VOLTAGE

NUMBER OF WIRES

X DIMENSION

230V ~ +

H05 RR-F 3 x 2,5 mm

230V 3~ +

H05 RR-F 4 x 1,5 mm

NOTE: the yellow/green earth wire must be connected to the terminal with the symbol and must be longer

than the other wires.

• Connect the connectors of the hob (G) to the connectors of the oven (F) matching the colours and alignment

of the housing guides visible on the top of the connectors (g. 7).

• Then make the connection by pushing the connectors all the way in, making sure that the tongue clicks into

place.

• Unscrew the nut of the ground screw (H) (g. 8) on the top covering of the oven and insert the yellow/green

ground cable, leaving the washer in place. Screw the nut back onto the screw and tighten it as far as it will go.

Important: if the connection and colour coding of the hob terminals do not comply with the data given on the

hob/oven pairing product sheet located on the top of the oven, please request the adapter kit code AMC 873,

available from After Sales Service.

7 8

1 2 3 4 5 6

Sem comentários

Whirlpool PCTOC140060NE Instruções de Utilização Página 4