Whirlpool AKR 689 IX Instruções de Utilização descarregar pdf

5019 318 33183

D F NL E

P IGR

EXTRACTOR OR FILTERING HOOD INSTALLATION

The minimum distance between the support surface of the recipients on the cooking device and the lowest part of

the hood must not be less than 65 cm in case of electric cookers and 75 cm for gas or combination cookers. If the

installation instructions for the gas cooker specify a greater distance, this must be taken into account. The fume

hose and hose clamps are not supplied. Contact a qualified technician for installation.

1. Mark a centre-line on the wall from the cooktop to the ceiling (1).

2. Taking into account the above-mentioned distances from the cooktop, mark the distance from the cooktop with a pencil

and place the template against the wall on the mark (2).

3. Using the template supplied, mark the holes, drill them and insert the rawlplugs (3), partly screw in 2 screws in the top

holes (4) and hang the hood.

4. Remove the grease filters (5).

5. Mark the bottom fixing holes (6).

6. Remove the hood, drill the holes and insert the rawlplugs (7).

7. Hang the hood and screw in the bottom screws (8) and the top ones (9).

8. Fix the flue support to the wall as close as possible to the ceiling (7): drill and insert 2 rawlplugs (10), position the support

(11) and secure it with 2 screws (12).

Extractor version:

steam and fumes are exhausted to the outside through a discharge pipe fixed to the collar located on the

top of the hood (13A).

Important!

If the hood is fitted with a carbon filter, this must be removed. The discharge air must not be ducted to a flue used

for removing fumes produced by appliances using gas or other fuels, but must have a separate outlet. All national regulations

governing extraction of fumes must be observed.

Filtering Version:

The air is filtered by a carbon filter and recycled in the surrounding environment. For this version, fit the

deflector provided(13F).

Caution!

If the hood is not equipped with a carbon filter, one must be ordered and fitted prior to use.

Connect the hood to the mains supply (14) and fix the telescopic flue to the flue bracket with 2 screws (15). Slide the bottom

section down into its seat on the top of the hood.

31833183.fm Page 4 Friday, November 18, 2005 12:56 PM

1 2 3

5019 318 33183 1
THE CONTROL PANEL 2

Resumo do Conteúdo

Página 1 - 5019 318 33183

5019 318 33183D F NL EGBP IGREXTRACTOR OR FILTERING HOOD INSTALLATIONThe minimum distance between the support surface of the recipients on the cooking

Página 2 - THE CONTROL PANEL

5019 318 33183D F NL EGBP IGR1. Control panel2. Grease filters3. Grease filter handles4. Light above cooker5. Telescopic flueTo clean the grease filte

Página 3

5019 318 33183D F NL EGBP IGRSAFEGUARDING THE ENVIRONMENT1. PackingPacking materials are 100% recyclable and are marked with the recycling symbol . C