
EN15
After unpacking the hob, check that there has been no damage during transport. If in doubt, contact the dealer or After-sales Service.
PREPARING THE HOUSING UNIT
INSTALLATION
WARNING
- Install a separator panel under the hob.
- The lower part of the product must not be
accessible after installation.
- If there is an oven beneath the hob, do not
install the seperator panel.
• For the distance between the underside of the appliance and the separator panel below, observe the dimensions given in the figure.
• Do not obstruct the minimum required clearance between the hob and the top of the unit to ensure the correct operation of the product.
• Cut the worktop to fit before installing the hob and carefully remove any shavings or sawdust.
min. 5 mm
min. 20 mm
min. 5 mm
Comentários a estes Manuais